Page 1 of 1

MY NEW LML REBUILD

PostPosted: Mon Sep 26, 2016 7:06 pm
by Dmaz1
DSCF4172.JPG
IT DON'T LOOK LIKE IT £500 IN PARTS
DSCF4172.JPG (160.9 KiB) Viewed 3920 times

Hello e1 here is my latest project. Daz :D

Re: MY NEW LML REBUILD

PostPosted: Mon Sep 26, 2016 7:15 pm
by Dmaz1
DSCF4175.JPG
LETS START
DSCF4175.JPG (173.4 KiB) Viewed 3919 times

DSCF4182.JPG
DSCF4182.JPG (148.4 KiB) Viewed 3919 times

DSCF4183.JPG
DSCF4183.JPG (141.53 KiB) Viewed 3919 times

Re: MY NEW LML REBUILD

PostPosted: Mon Sep 26, 2016 7:20 pm
by Dmaz1
DSCF4184.JPG
GET RID OF EXHAUST SECONDRY FILTER AND THE ONE UNDER SEAT
DSCF4184.JPG (148.21 KiB) Viewed 3919 times

DSCF4188.JPG
DISCONNECT CLUTCH BRAKE AND CARB CABLES PLUS ELECTRICS
DSCF4188.JPG (164.19 KiB) Viewed 3919 times

DSCF4187.JPG
KEEP CABLES ATTACHED TO SELECTOR BOX THOUGH
DSCF4187.JPG (160.32 KiB) Viewed 3919 times

Re: MY NEW LML REBUILD

PostPosted: Mon Sep 26, 2016 7:24 pm
by Dmaz1
DSCF4189.JPG
IF ON YOUR OWN DROP ENGINE ON A CARDBOARD BOX
DSCF4189.JPG (164.42 KiB) Viewed 3919 times

DSCF4191.JPG
RIGHT LETS GET THE CRANK OUT
DSCF4191.JPG (158.55 KiB) Viewed 3919 times

DSCF4193.JPG
USE THE RIGHT PULLER
DSCF4193.JPG (161.4 KiB) Viewed 3919 times

Re: MY NEW LML REBUILD

PostPosted: Mon Sep 26, 2016 7:29 pm
by Dmaz1
DSCF4195.JPG
THIS IS WERE THE TIMING WAS SET AT THE FACTORY
DSCF4195.JPG (137.38 KiB) Viewed 3919 times

DSCF4198.JPG
TOP END ANYONE?
DSCF4198.JPG (160.85 KiB) Viewed 3919 times

DSCF4199.JPG
THE POOR QUALITY CRANK THAT HAS TO GO NOTE SIZE OF THE PORTS ON THE CASES TO THE 125 BASE GASKET
DSCF4199.JPG (123.69 KiB) Viewed 3919 times

Re: MY NEW LML REBUILD

PostPosted: Mon Sep 26, 2016 7:35 pm
by Dmaz1
DSCF4204.JPG
WHO NEEDS A STAND
DSCF4204.JPG (168.25 KiB) Viewed 3918 times

DSCF4208.JPG
SPOT THE DIFF
DSCF4208.JPG (153.22 KiB) Viewed 3918 times

Re: MY NEW LML REBUILD

PostPosted: Mon Sep 26, 2016 7:42 pm
by Dmaz1
DSCF4220.JPG
REBUILD SEE POOR QUALITY OF REED RUBBER TUT TUT!
DSCF4220.JPG (157.49 KiB) Viewed 3912 times

DSCF4202.JPG
TIDED UP AND POLINI REED FITTED
DSCF4202.JPG (6.83 KiB) Viewed 3902 times


DSCF4223.JPG
PX CRANK IN AND CASE REPLACED AND TORQUED
DSCF4223.JPG (166.97 KiB) Viewed 3912 times

Re: MY NEW LML REBUILD

PostPosted: Mon Sep 26, 2016 7:46 pm
by Dmaz1
DSCF4224.JPG
NEW 24/24 CARB FITTED
DSCF4224.JPG (147.24 KiB) Viewed 3912 times

DSCF4225.JPG
PINASCO 177 PISTON FITTED AND OILED UP
DSCF4225.JPG (158.23 KiB) Viewed 3912 times

DSCF4226.JPG
CHAMFER THE PORTS AND FEEL THE DIFF WITH YOUR FINGER SMOOTH!
DSCF4226.JPG (155.32 KiB) Viewed 3912 times

Re: MY NEW LML REBUILD

PostPosted: Mon Sep 26, 2016 7:49 pm
by Dmaz1
DSCF4227.JPG
LIGHT SMEAR OF GREASE ON THE HEAD BEFORE FITTING
DSCF4227.JPG (164.87 KiB) Viewed 3911 times

DSCF4228.JPG
ENGINE BACK IN
DSCF4228.JPG (182.11 KiB) Viewed 3911 times

DSCF4230.JPG
THERE WERE NO ISSUES AT ALL EVEN THE FLYWHEEL WENT BACK ON WITHOUT FOULUNG THE CYLINDER WHICH WAS NICE!
DSCF4230.JPG (161.91 KiB) Viewed 3911 times

Re: MY NEW LML REBUILD

PostPosted: Mon Sep 26, 2016 8:08 pm
by Dmaz1
DSCF4236.JPG
CARB BOX LID ISSUE SORTED ONCE AND FOR ALL THE PAINT GOT A LITTLE DAMAGED BUT NO MORE WRESTLING
DSCF4236.JPG (6.89 KiB) Viewed 3908 times

DSCF4231.JPG
NEW ANCILLOTTI SEAT FITTED
DSCF4231.JPG (7.46 KiB) Viewed 3908 times

DSCF4232.JPG
FINISHED
DSCF4232.JPG (7.64 KiB) Viewed 3908 times

THE SCOOTER RUNS GREAT ON AUTO LUBE WITH AN EXTRA 1% FOR THE FIRST 250 MILES
THE SET UP IS
IDLE 55-160
AIR 160
ATOM BE3
MAIN 120
SCOOTER 177 PINASCO POLINI REED 24 CARB SIMONINI PIPE
MITCH S1 TYRES AND SIP CHROME RIMS
COSTS A TAD UNDER £2700.
CHEERS DAZ.

Re: MY NEW LML REBUILD

PostPosted: Mon Sep 26, 2016 8:11 pm
by Dmaz1
JUST TO LET YOU KNOW THE SEAT DON'T FIT VERY WELL WITH THE HINGE THAT CAME WITH, I USED THE LML SEAT HINGE AND RE DRILLED THE HOLES AND ALL IS WELL NO WOBBLY SEAT.

Re: MY NEW LML REBUILD

PostPosted: Sun Oct 09, 2016 7:44 pm
by simonb
Wow there's a guy who knows what he's doing. Look great.

Re: MY NEW LML REBUILD

PostPosted: Fri Oct 21, 2016 8:00 pm
by Laurie
Does it work?

Re: MY NEW LML REBUILD

PostPosted: Fri Oct 21, 2016 10:45 pm
by ricalnic
Reminds me of my build, 6yrs on and still going strong

Image

viewtopic.php?f=6&t=499

So how's the performance of your build ? We're the casing ports aligned for the pinasco cylinder ?, do you think you will need to alter the gearing at all ?