Flyscreen Install

Making your LML stand out in a crowd

Moderators: Geezer, Tony

Flyscreen Install

Postby LeeG » Thu Nov 10, 2016 12:33 pm

Hi all.
Just got my nice new TSR flyscreen.

I have worked out where everything goes, good start :D

But I have a couple of questions.

Do the clamps that fit in the mirror fixing points go inbetween the mirror bracket and head or under the mirror bracket?
Also whatever way I try the bolts are too short, they are 20mm long, not quite catching the thread in the head. The clamps about 10mm wide, but obviously tightens down a bit to hold the support bars for the screen. So do I go for 25 or 30mm bolts?

While I'm here, I also bought clamp on crash bars for the front mudguard, however the grub screws seem to short to clamp up, they are 10mm long, am I doing something wrong or do I need longer screws again?
Also is it worth using anything between the grub screw and the mudguard to spread the pressure so as not to deform the mudguard?

Cheers for any help.
LeeG
Member
 
Posts: 11
Joined: Wed Oct 05, 2016 9:04 pm
Scooter: LML Star 125 Last Run

Return to LML - Customisation & Accessories

Who is online

Users browsing this forum: No registered users and 4 guests

cron