Engine and Simonini pipe

Moderators: ElbowNi, Geezer, NICK, Tony, mikey 69

Re: Engine and Simonini pipe

Postby scunner125 » Wed Feb 08, 2012 3:43 pm

Tony V5 says vespa douglas frame number is the same too ,gearbox has lml stamp and as Handsome pointed out engine number thingy was stamped with the same logo as in his photo ! I had to clean and rub hard with baby wipe to see it ,things are a bit messy down there and simo pipe is preventing me from anymore wiping feck noes what number exists if any ! It has the same marking for sure though as Al's photo, is that LML !'
scunner125
Member
 
Posts: 1542
Joined: Thu Jul 21, 2011 10:59 am
Location: Edinburgh
Scooter: Vespa px125 frame with
150 5 port lml engine
&
Vespa T5 172 mallosi

Re: Engine and Simonini pipe

Postby FROG » Wed Feb 08, 2012 8:47 pm

Scunner, you will never be booted off mate, you are one of us ;)
The cylinder cowling is deffo an LML one as it has the threaded clip for the airpump.
The body is VESPA for sure as VIN starts with ZAPM.......... , but what the heck is that long screw with the
wing nut attached to it ?? Have you gotton rid of your autolube or something ??
E18 engine designation for a 125 as E22 is for a 150.
I guess the chappy that owned it before just used all the best bits of what he had and made it all work.
At the end of the day, you have a nice scoot that works and has a nice if mysterious history, now ride it like you stole it
and at 800 pound for what you bought it for I think you did steal it :lol:

FROG
SAY NAY TO TWIST 'N' GAY
FROG
Member
 
Posts: 924
Joined: Fri Mar 11, 2011 11:09 am
Location: SYDNEY AUSTRALIA

Re: Engine and Simonini pipe

Postby pikey » Wed Feb 08, 2012 8:59 pm

Dont worry neither have I :lol: :lol: :lol:
User avatar
pikey
Member
 
Posts: 415
Joined: Sun Nov 21, 2010 7:11 pm
Location: Stourbridge West Midlands

Re: Engine and Simonini pipe

Postby scunner125 » Wed Feb 08, 2012 9:04 pm

Evening Frog ! Sorry morning Frog ,my carb monster bolt is a masterpiece in design :lol: ie i'm a lazy bastoord . When i got scoot it had an open hole for lube so i got a grommet and pushed that beasty bolt through and put a wing nut on it very classy ,my theory was that if it came loose with vibration it would take 10 years to vibrate off ! If it managed to come off the bolt was so big it couldn't fall doon into my carburator hole thingy :lol: (genius at work.com)

Away from that thanks for ur feedback and yes in my panel my legs were shut but it looks like i'm cocking my leg for a piss or farting !! Check oot my 2 L plates at the front mega shine ,very proud of my Frankensein monster :D
Image

oops i got mixed up with show us your scoot forum no worries (panel with reflection) :D
scunner125
Member
 
Posts: 1542
Joined: Thu Jul 21, 2011 10:59 am
Location: Edinburgh
Scooter: Vespa px125 frame with
150 5 port lml engine
&
Vespa T5 172 mallosi

Re: Engine and Simonini pipe

Postby scunner125 » Wed Feb 08, 2012 9:13 pm

pikey wrote:Dont worry neither have I :lol: :lol: :lol:

:lol:
scunner125
Member
 
Posts: 1542
Joined: Thu Jul 21, 2011 10:59 am
Location: Edinburgh
Scooter: Vespa px125 frame with
150 5 port lml engine
&
Vespa T5 172 mallosi

Re: Engine and Simonini pipe

Postby Tony » Wed Feb 08, 2012 9:32 pm

Good game the night Scunner...... ;)











Bet yer right Scunnered !!! :lol: ...."..\0/
Image
User avatar
Tony
Site Admin
 
Posts: 6683
Joined: Sun Jan 17, 2010 10:40 am
Location: Fort Augustus
Scooter: 2009 LML Via Toscana
1986 Vespa T5 Mk1
1982 Lambretta GP 200
1959 Vespa VBA 150

Re: Engine and Simonini pipe

Postby scunner125 » Wed Feb 08, 2012 9:56 pm

Yes it seems to have been a wipeout ,i was betting on ladbrokes and kept seeing the disaster unfold ! Hearts either turn up or churn up ,enjoy ur evening mucker i just hope we dont go into liquidation :cry:
scunner125
Member
 
Posts: 1542
Joined: Thu Jul 21, 2011 10:59 am
Location: Edinburgh
Scooter: Vespa px125 frame with
150 5 port lml engine
&
Vespa T5 172 mallosi

Re: Engine and Simonini pipe

Postby Tony » Wed Feb 08, 2012 10:16 pm

Hopefully not mate....let the Govan lot go down that road..... :D

Gotta admit yer man Romanov Has been good to the locals up here......sponsored the local RNLI etc.....

But me

I just cant get enough....\0/
Image
User avatar
Tony
Site Admin
 
Posts: 6683
Joined: Sun Jan 17, 2010 10:40 am
Location: Fort Augustus
Scooter: 2009 LML Via Toscana
1986 Vespa T5 Mk1
1982 Lambretta GP 200
1959 Vespa VBA 150

Re: Engine and Simonini pipe

Postby scunner125 » Thu Feb 09, 2012 8:25 am

The press highlight his faults ,i've never heard of him sponsoring the RNLI ! Just goes to show that the press in the west can't stand him either can the SFA ,its quite simple if we win leagues etc and celtic and rangers don't the SFA stand to loose lots of cash . If the 2 gers tic are not winning their very loyal fans feck off look at gers crowds now ! Celtic are no better in October when they were loosing parkhead was half empty ,point is without the revenue SFA will suffer and their wages its nice handshakes all round ! As u say Rangers are gonna be struggling soon, even refs are struggling to help them . Personally i dont want any club to be fecked even Hibs . Your guys will win the league for sure though !
More importantly should i take 150 head of and decoke it at 500 miles ,scooters are more interesting to me these days :lol:
scunner125
Member
 
Posts: 1542
Joined: Thu Jul 21, 2011 10:59 am
Location: Edinburgh
Scooter: Vespa px125 frame with
150 5 port lml engine
&
Vespa T5 172 mallosi

Re: Engine and Simonini pipe

Postby tipper » Thu Feb 09, 2012 9:52 am

Scanner,what oil do you use ?
Image
User avatar
tipper
Site Admin
 
Posts: 7767
Joined: Wed Jan 27, 2010 8:57 pm

Re: Engine and Simonini pipe

Postby scunner125 » Thu Feb 09, 2012 11:18 am

(Scanner) :lol: I use Shell Advance VLX2 synthetic Tipper ! Gonna buy some SAE30 oil for gear box any idea of good makes ?
What makes u ask Tipper ?
scunner125
Member
 
Posts: 1542
Joined: Thu Jul 21, 2011 10:59 am
Location: Edinburgh
Scooter: Vespa px125 frame with
150 5 port lml engine
&
Vespa T5 172 mallosi

Re: Engine and Simonini pipe

Postby scunner125 » Fri Feb 10, 2012 8:57 pm

Why do u ask Tipper !No worries just wondered why u asked Tipper ,time for vino :lol:
scunner125
Member
 
Posts: 1542
Joined: Thu Jul 21, 2011 10:59 am
Location: Edinburgh
Scooter: Vespa px125 frame with
150 5 port lml engine
&
Vespa T5 172 mallosi

Previous

Return to General Discussion - Scooter related

Who is online

Users browsing this forum: No registered users and 3 guests

cron